RM Bridge Advanced V8i is comprehensive 2D/3D/4D software used by bridge engineers for bridges of all types, materials, and construction methods. A fully integrated modeling, analysis, and design process and rapid results processing bring economy to bridge design. RM Bridge Advanced produces deliverables derived directly from the models being analyzed – improving bridge constructability and ensuring smooth project delivery.
All-in-One Bridge System
RM Bridge Advanced follows an iterative modeling and analysis process that gives users remarkable flexibility in the bridge design process. It puts an end to costly start-over tasks that occur in midstream and has the added benefit of ensuring that an efficient and balanced project is delivered. This enables engineers to achieve extreme accuracy and go to unprecedented levels of analytical exploration and simulation. The software provides seamless support for required international design codes.
RM Bridge Advanced V8i. 08.11.18.01RM Bridge Advanced follows an iterative modeling and analysis process that gives users remarkable flexibility in the bridge design process. It puts an end to costly start-over tasks that occur in midstream and has the added benefit of ensuring that an efficient and balanced project is delivered. This enables engineers to achieve extreme accuracy and go to unprecedented levels of analytical exploration and simulation. The software provides seamless support for required international design codes.
RM Bridge Advanced is the core software of the RM Bridge family, which offers integrated modules for bridge engineering and construction. RM Bridge software comprises a selection of advanced modules for the intensive analysis requirements of complex bridge types, such as long-span cable-stayed and suspension bridges. Add-on modules address specialized activities such as advanced earthquake analysis, rolling stock analysis, erection control, simulation of wind-tunnel tests, wind buffeting, as well as a variety of construction and fabrication methods such as incremental launching, in-situ casting, and others.
Develop a Complete Bridge Project
RM Bridge Advanced with special add-on modules addresses all types of bridges, from reinforced and pre-stressed concrete to steel and composite bridges, arch bridges, suspension and cable-stayed bridges, and more. It performs consistent, time-dependent analysis of creep and shrinkage and steel relaxation. Users can analyze the deformability of the superstructure and consider in detail the used construction methods and sequences as well as in teractions between the superstructure and substructure or structure and soil.
RM Bridge Advanced with special add-on modules addresses all types of bridges, from reinforced and pre-stressed concrete to steel and composite bridges, arch bridges, suspension and cable-stayed bridges, and more. It performs consistent, time-dependent analysis of creep and shrinkage and steel relaxation. Users can analyze the deformability of the superstructure and consider in detail the used construction methods and sequences as well as in teractions between the superstructure and substructure or structure and soil.
RM Bridge Advanced is an iterative system that provides engineers broad flexibility in the development of a complete bridge project, saving time and improving project delivery. Complete static and dynamic analysis capabilities help them address virtually any structural issue. The ability to model time-dependent material effects and analyze construction staging provides distinct competitive advantages. Expert parametric geometry definition and control, as well as easy modification, aid in construction management, erection simulation, and seismic analysis. Users can even provide project stakeholders with open, browser-like access to the bridge design project for viewing, redlining, printing, and plotting. Batch and interactive mode as well as programming capabilities make the application very attractive for quick and easy use. Connection to Bentley inspection applications highlights RM Bridge as an all in one solution – even in the maintenance process of the bridge life cycle.
Infrastructure Project Definition
Unlike comparable bridge software, RM Bridge Advanced performs well in the context of the infrastructure project. The software shares data in MicroStation® DGN, LANDXML, DWG, and other formats. This capability enables the engineer to accurately define the bridge based on the roadway or railway axis geometry from Power Rail Track®, Power InRoads®, Power GEOPAK®, or alternatively from AutoCAD, Civil 3D, and other partial applications. With RM Bridge Advanced, the bridge engineer has a wealth of civil project information at hand: roadway horizontal alignments, vertical profiles, photogrammetric data, digital terrain models, isolines (contour lines), raster graphics, and rail line designs. All bridge design and construction data contributes to the process of bridge information modeling (BrIM).
Unlike comparable bridge software, RM Bridge Advanced performs well in the context of the infrastructure project. The software shares data in MicroStation® DGN, LANDXML, DWG, and other formats. This capability enables the engineer to accurately define the bridge based on the roadway or railway axis geometry from Power Rail Track®, Power InRoads®, Power GEOPAK®, or alternatively from AutoCAD, Civil 3D, and other partial applications. With RM Bridge Advanced, the bridge engineer has a wealth of civil project information at hand: roadway horizontal alignments, vertical profiles, photogrammetric data, digital terrain models, isolines (contour lines), raster graphics, and rail line designs. All bridge design and construction data contributes to the process of bridge information modeling (BrIM).
What's new?
- RM Analysis
- Completely revised and improved access to results in 3D graphic
- Presentation of lanes and trains in 3D graphic
- Presentation of influence line results in 3D graphic
- FEM: New solution for plate models.
Attention: Old RM FEM projects are not supported anymore.
Such projects have to be handled with version 08.11.12.xx or older. - FEM: Graphical support for checking FE model (Structure/Bodies)
- FEM: All results are displayed numerically and graphically (Results/Load cases – FE, Results/Envelopes – FE)
- Maxwell damper
- Friction pendulum spring element
- RMSET: Additional results of design code checks available (e.g. ShearCheck Vrd,max , SteelCheck capacities, Crackwidth), see “Miscellaneous”.
- RMSET: Selection of nodes in a specified box is available
- Vrd,max displayed at Structure/Elements/Checks
- New CrackCheck variant acc. to Eurocode 7.3.4 (selectable in schedule action)
- New module RateF: Calculation of load rating factors for steel check design (s. training example)
- Much improved cross section graphic
- Tendon input improved
- RM Modeler
- New concept of FEM
- FEM: Much improved definition of shell elements in cross sections
- FEM: Independent shell and solid meshes
- FEM: Easy sub-division of shell elements
- FEM: Automatic definition of structural connections (e.g. deck – pier, cable – FE)
- Point-wise definition of boundaries for auto-meshing (s. training example)
- DGN import: Better default handling, improved UI
- GUI/Elements: Parallel access to left-bottom graphic in edit dialogues
- The "Export active segment only" option is now exporting only active segment and not others too.
- RM Wizard
- FEM: Reinforced Slab model (new cross section, roadway definition, variation along station, wind load, traffic (2D), protocol updated).
- The Wizard import is now able to import the code defintion (e.g. JTG) corretly, if French is chosen as input language.
- RM General
- The Micosoft based installer (MSI) is used instead of the NSIS
installer.
The new technology will result in smaller installer packages.
It will provide all basic RM Bridge files and all required System Prerequisites (.NET Framework 3.5, etc. ) with the product installation. Therefore no RM Bridge V8i Prerequisite Pack installation is required anymore! - Improved directory handling for choosing example & training directory
- The optional available RM licensed modules will not be retrieved
automatically to avoid over usage.
You need to use the <AutoModule> button to enable all additional licensed modules manually. - Added SELECT configuration option for setting friendly company name and address for output files
- Added latest SELECT licensing client v09.00.00.43
- Improved SELECT licensing restart behaviour to avoid over usage when unlicensed modules were chosen.
- Improved RMConfig Setup Tool will provide the same font as the RM applications instead of the default system font.
- The Micosoft based installer (MSI) is used instead of the NSIS
installer.
- RM Analysis
- RESPS: Freezing of program during calculation solved
- RunTCL: usage of files with Chinese names possible
- CREEP: Internal variables C90RTIME adjusted to external ones for CEB90
- CREEP: Managing of Pretens tendons as grouted internal tendons
- GUI/C&S-Curves: Correct switching between E(t) and Rel(t)
- SUPADD/SUPAND….: Superposition of external loadcases available
- FIBII: Write tendon forces to output superposition (as UltCheck)
- TDF: Proper handling of assemblies in loadsets and loadcases
- Stage Simulation: Correct consideration of ActOn/ActOff
- GUI/Tendon/Modify: Re-ordering rows
- RM Modeler
- Cable section: Input of areas in non-database units corrected
- TCL export: Increased precision of unit factor
- RM General
- Plot files with the old style Fortran header are now recognized again.
This issue applies to RM Bridge Advanced+ v8i v08.11.11.0x with RM plot files, which were created interactively (e.g. Influcence lines, creep & shrinkage) and very old plot files.
- Plot files with the old style Fortran header are now recognized again.
Link download: (Server Mega.co.nz)
Part 1: http://adf.ly/1CJjr8
Part 2: http://adf.ly/1CJk64
Part 3: http://adf.ly/1CJkH6
Part 4: http://adf.ly/1CJkQm
Part 5: http://adf.ly/1CJkbB
Part 6: http://adf.ly/1CJkmP
Part 7: http://adf.ly/1CJkv4
Part 8: http://adf.ly/1CJl4f
Part 9: http://adf.ly/1CJlEm
Password unrar: ifamilyengineering.blogspot.com
RM Bridge V8i. 08.01.18.01 (SS3)
How to download and install?
1. Just download it from server: Mega.co.nz :
Part 1: http://adf.ly/a0O62
Part 2: http://adf.ly/a0OB9
Part 3: http://adf.ly/a0OGR
Part 4: http://adf.ly/a0OJM
Part 5: http://adf.ly/a0OM6
Part 6: http://adf.ly/a0ONi
Part 7: http://adf.ly/a0OPf
Part 8: http://adf.ly/a0ORy
Part 9: http://adf.ly/a0OTl
2. Unrar with password: ifamilyengineering
3. Install the environment for RMBridge by run file rmbpk08101801en.exe
4. Install RMBridge by run file rmb08101801en.exe
RM Bridge v8i 08.10.07.02 (SS3)
Link download: (Server Mega.co.nz)
Part 1: http://adf.ly/1CKPqj
Part 2: http://adf.ly/1CKQAZ
Part 3: http://adf.ly/1CKQLi
Part 4: http://adf.ly/1CKQUT
Part 5: http://adf.ly/1CKSIN
Part 6: http://adf.ly/1CKQfU
Password unrar: ifamilyengineering.blogspot.com
RM Bridge v8i 08.10.03.02 (SS2)
Link download: (Server Mega.co.nz)
Part 1: http://adf.ly/1CKK1l
Part 2: http://adf.ly/1CKKCV
Part 3: http://adf.ly/1CKKQj
Part 4: http://adf.ly/1CKKbJ
Part 5: http://adf.ly/1CKKkG
Part 6: http://adf.ly/1CKKwO
Part 7: http://adf.ly/1CKL5c
Part 8: http://adf.ly/1CKLFv
Part 9: http://adf.ly/1CKLMH
Part 10: http://adf.ly/1CKLUo
Part 11: http://adf.ly/1CKLck
Part 12: http://adf.ly/1CKLnj
Part 13: http://adf.ly/1CKLvT
Part 14: http://adf.ly/1CKM24
Password unrar: ifamilyengineering.blogspot.com
RM Bridge v8i 08.09.86.01 (SS1)
Link download: (Server Mega.co.nz)
Part 1: http://adf.ly/1CKCZj
Part 2: http://adf.ly/1CKCmT
Part 3: http://adf.ly/1CKCvm
Part 4: http://adf.ly/1CKD4i
Part 5: http://adf.ly/1CKDDi
Part 6: http://adf.ly/1CKDR2
Part 7: http://adf.ly/1CKDaM
Part 8: http://adf.ly/1CKDlr
Part 9: http://adf.ly/1CKDwR
Password unrar: ifamilyengineering.blogspot.com
Enjoy!
No comments:
Post a Comment